SOP for Operating Procedure of Induction Sealing Machine

OBJECTIVE 

To lay down a procedure for the operation of the induction sealing machine. 

SCOPE 

This procedure applies to the production department in the Pharmaceutical Manufacturing Facilities Formulation division. 

RESPONSIBILITY 

• The concerned operator is responsible for the implementation of the process. 
• The Production In-Charge is responsible for the execution and compliance of the procedure. 

ALSO READ: SOP for Cleaning, Handling & Storage of Production Utensils

PROCEDURE 

• Ensure that the machine is clean and free from the traces of previous products. 
• Ensure that line clearance is taken. 
• Adjust the height of the sealing head plate by rotating the back knob; to the required height of the container, which is to be induction sealed. 
• Adjust the heat timer to 3 to 5 seconds as per the requirement. 
• Place the container locked with a cap below the induction sealing head plate.

• Press the START switch to start the sealing. 
• Check the sealing quality along with the approval of the in-process Quality Assurance person. 
• Start the further activity. 
• Maintain the proper labeling at each stage. 
• All the operation details shall be entered in the equipment usage log book.

ABBREVIATION

Q.A - Quality Assurance 

SOP - Standard Operating Procedure 

No. - Number 

P.D - Production

ANNEXURE

Nil

REVISION HISTORY

Nil

ALSO READ: SOP for Cleaning Procedure of Induction Sealing Machine