SOP for Operation of Capsule inspection cum Polishing Machine

OBJECTIVE
To provide guidelines for the operation of capsule inspection cum polishing machine.

SCOPE
The procedure outlines the method of operation of the Capsule inspection & Polishing Machine.

MAKE AND CAPACITY
Pacific Technologies


RESPONSIBILITY
Production Chemist
Production Manager 
Operator


PROCEDURE
  • Use a Nose mask & rubber gloves while handling the product.
  • Fix the product label giving details of the product.
  • Load the hopper with Capsules for polishing.
  • Adjust the gap between the hopper & inspection plate.
  • Start the vacuum pump.
  • Start the brush unit & check that it is rotating in a clockwise direction.
  • Start the belt.
  • Start the vibrator & adjust the rate of flow of capsules by adjusting the vibrator.
  • Inspect the capsules visually for broken caps. dented caps as the capsules pass through the inspection belt.
  • Pick the rejected capsules & allow only good capsules to enter the polishing unit.
  • Collect the polished capsules in airtight containers & store them in a humidity & temperature-controlled area.


PRECAUTION
  • Humidity not to exceed 50% + 5% & Temperature 25 deg. + 2 deg. C.
  • Ensure that the Machine is clean before and after use.
  • Never put any part of the body in the running machine.
  • Use Latex hand gloves and a Mask while handling the product.

REVISION HISTORY
Nil

Post a Comment

0 Comments

Close Menu
close