SOP for Preventive Maintenance of V-Blender

OBJECTIVE
To provide a procedure for preventive maintenance of the V-blender to obtain optimum performance of the machine and achieve the designed output as per the manufacturer’s design.

SCOPE
It applies to general checks and cleaning of V-blender.

RESPONSIBILITY
Maintenance Personnel: Inspect equipment components and take any corrective measures.
Operators: For keeping the machine clean after use.
Maintenance Manager: To ensure that the procedure is followed.

PROCEDURE
  • Clean the bearings (pillar bearings) with an oil-dipped cloth.
  • Lubricate pillar bearings after cleaning with multipurpose grease once a month.
  • Refill gearbox oil with lubricant (SAE 90) every six months.
  • Lubricate chain coupling with multipurpose grease every six months or when necessary.
  • Clean electric contacts of the main supply, switches, and controllers using a suitable spray solution, for example, penetrating oil, once every year.
  • Check silicon rubber seals, for wear, and replace them if necessary.

ANNEXURE
Nil

REVISION HISTORY
Nil

Post a Comment

0 Comments

Close Menu
close