SOP for Cleaning of Capsule Manufacturing Area

OBJECTIVE
To provide a procedure for cleaning of Capsule Manufacturing Area.

SCOPE
Covers the Cleaning of the Manufacturing Area in the Capsule Department.

RESPONSIBILITY
Cleaners
Production Chemist
Production In-charge.

PROCEDURE
  • After the completion of a batch, the area is made clean for the commencement of the next batch.
  • Remove all the previous product labels.
  • Clean the Cone Blender as per SOP for the Cleaning Procedure of the Double Cone Blender.
  • Clean thoroughly the walls, and floor with soap solution and water respectively.
  • Clean the AHU filters.
  • De-dust the dirt collected on the light fixtures.
  • Walls & floor joints are to be cleaned at the time of changeover.
  • After cleaning, put the status label on each piece of equipment and the door.

PRECAUTION
  • Stop the activity and inform the QA In-charge in case of any unusual observation.

RECORDS / SPECIMEN
  • Carry out the cleaning procedure as per above and enter into the BMR.

FREQUENCY
At the time of the product change over.

REVISION HISTORY
Nil

Post a Comment

0 Comments

Close Menu
close