SOP for Cleaning of Capsule Filling Area

OBJECTIVE
To provide a procedure for cleaning the capsule filling area.

SCOPE
Covers the cleaning of the capsule filling area in the capsule department for product changeover.

RESPONSIBILITY
Cleaners
Production Chemist
Production In-charge.

PROCEDURE
  • After the completion of a batch, the area is made clean for the commencement of the next batch.
  • Remove all the previous product labels.
  • Clean the semi-automatic capsule filling machine as per SOP for Cleaning Procedure of Semi-Automatic Capsule Filling Machine. 
  • Clean the inspection cum polishing machine as per the SOP for the Cleaning Procedure of the Capsule Polishing Machine.
  • Clean thoroughly the walls, and floor with soap solution and water respectively.
  • Clean the AHU Filter.
  • De-dust the dirt collected on the light fixtures and on the AC.
  • Walls & floor joints are to be cleaned at the time of product changeover.
  • After cleaning, put the status label on each piece of equipment and on the door.

PRECAUTION
  • Stop the activity and inform the QA In-charge in case of any unusual observation.

RECORDS / SPECIMEN
  • Carry out the cleaning procedure as per above and enter into the BMR.

FREQUENCY
At the time of the product changeover.

REVISION HISTORY
Nil

Post a Comment

0 Comments

Close Menu
close