SOP for Cleaning Procedure for UV-Visible Spectrophotometer

OBJECTIVE
To lay down the procedure for cleaning of UV-Visible Spectrophotometer

SCOPE
This SOP shall be applicable for UV-Visible Spectrophotometer installed in Quality Control Laboratory at XYZ Limited

RESPONSIBILITY
Execution: Chemist and above-QC department


PROCEDURE
  • Frequency: After each use
  • After completion of the testing, remove cuvettes from the sample compartment.
  • Remove the test solution from the cuvette and wash it with the respective solvent in which the solution is prepared.
  • Rinse with purified water properly to remove the traces of the sample followed by methanol and wipe with tissue paper. Dry in the air and keep it in a proper place.
  • Clean the sample compartment with a dry cloth to remove any foreign material if required.
  • Clean the outer surface of the instrument with Isopropyl alcohol and dry it with tissue paper when required.
  • Record the details of cleaning in the log book of the instrument as per the current version of SOP.

ABBREVIATION
SOP: Standard Operating Procedure
Q.C: Quality control

ANNEXURE
Nil

REVISION HISTORY
Nil

Post a Comment

0 Comments

Close Menu
close