SOP for Operation of Digital Bottle Cap Torque Tester

OBJECTIVE
To provide guidelines for the Operation of the Digital Bottle Cap Torque Tester.

SCOPE
To establish a procedure for the operation of the Digital Bottle Cap Torque Tester.

RESPONSIBILITY 
Q.A Executive.

PROCEDURE
  • Ascertain that the system is properly placed on a hard & even surface. Plug the adapter into a wall electric socket.
  • Place the bottle between the grips and turn the screw till the bottle is rigidly held in it.
  • Switch on the system, wait for two minutes.
  • Push the Zero Button.
  • Press the PEAK button
  • Select the unit in which torque value is required to display / measure. The torque value required for Blue Hawaii hair oil is Ncm.
  • Apply the force on the cap/seal to open it manually.
  • The maximum torque value will be held if the peak was selected.
  • Note the reading.
  • To bring the system in normal condition, push the PEAK button once again.
  • Repeat operation points 2 to 10 for each and every bottle checked.

ANNEXURE
Nil

REVISION HISTORY
Nil

Post a Comment

0 Comments

Close Menu
close