OBJECTIVE
To provide a procedure for the operation and maintenance of fire extinguishers.
SCOPE
It applies to all the fire extinguishers at XYZ Limited.
RESPONSIBILITY
- It is the responsibility of firefighters to use the fire extinguishers as per this procedure.
- It is the responsibility of Maintenance personnel for monthly/yearly checks of fire extinguishers as per this SOP.
- It is the responsibility of the QA Manager to ensure compliance as per this SOP.
Types of Fire Extinguishers used at XYZ Limited:
- Dry Chemical Powder fire extinguisher.
- Carbon Dioxide fire extinguisher.
- Hose reel fire extinguisher.
PROCEDURE
Operation:
- Operation of Dry Chemical Powder fire extinguisher and Carbon Dioxide fire extinguisher:
- Break the seal and remove the security clip.
- Aim at the base of the fire.
- Squeeze the trigger to discharge.
- Operation of Hose reel fire extinguisher:
- Turn on the valve.
- Run out the hose.
- Open the nozzle and aim at the base of the fire.
- The dry chemical powder fire extinguishers and the carbon dioxide fire extinguishers shall be used for chemical and electrical fires.
- Hose reel fire extinguishers shall be used for ordinary fires.
- Do not use hose-reel fire extinguishers for electrical fires.
Maintenance:
- Recharge the dry chemical powder fire extinguisher and carbon dioxide fire extinguisher after every use. If not used, they shall be recharged annually.
- Check for leakages in all types of fire extinguishers once in every month or when necessary.
- Check the hose reel fire extinguishers every month for water discharge.
- Clean all the fire extinguishers at least once a week.
- Label all the fire extinguishers appropriately, mentioning the date of service and the due date of service to be done.
- Annual maintenance of all the fire extinguishers will be done by the service provider.
ABBREVIATIONS
SOP: Standard Operating Procedure.
ANNEXURE
Nil
REVISION HISTORY
Nil
0 Comments