SOP for Sink and Drain Sanitization

Purpose
To lay down the procedure for regular sanitization of Sinks and Drains in the manufacturing area and maintenance of related records.

Scope
This procedure is applicable to Sinks, drains, and Manholes in and around the production area.

Reference
In house

Responsibility
Front Desk/Admin. Officer - HR & Admin. Department
  • To check whether proper drain sanitization is done or not.
  • To maintain the records of sanitization.

Distribution
Quality Assurance (QA) Department.
HR and Admin Department.
All users.
Plant Head.

Procedure
  • Remove all objects near the sink, and drain within the manufacturing area.
  • Once A day
  • Flush out all drainage channels with water after removing solid debris using flexible brushes every week.
  • Wash Sink and brackets using a cleaning agent and water followed by sanitization with a suitable sanitizing agent.
  • Use 10% Phenyl, 2.5% Dettol, or 2.5% Savlon solution alternatively every month.
  • Remove the covers from the Manhole.
  • Remove all accumulated debris & clean the drainage channel with a hot detergent solution followed by sanitization with a suitable sanitizing agent Appx. 100 ml sanitization solution.
  • Replace the Manhole covers & wipe the surrounding floor area with a Mop soaked in disinfectant solution.
  • Document all activities in sink & drain sanitization record (Attachment-1)
  • Sanitizing Agent: 10% Phenyl, 2.5% Dettol, or 2.5% Savlon solution.

Attachments
Attachment-1: Drain and Sink sanitization record, Department wise

Abbreviation
Nil

Revision History
Nil

Post a Comment

0 Comments

Close Menu
close